Architecture

The hardware design architecture is described with Mermaid as follows:

        ---
config:
    theme: neutral
    flowchart:
        curve: basis
---
flowchart LR
    %% style
    classDef component_3V3 fill:#ffffff, stroke:#00aa00, stroke-width:2px, color:#000
    classDef component_5V0 fill:#ffffff, stroke:#ffaa00, stroke-width:2px, color:#000
    classDef component_VBT fill:#ffffff, stroke:#aa0000, stroke-width:2px, color:#000

    style MAINBOARD     fill:#fff, stroke:#000, stroke-width:1.25px
    style POWER         fill:#fff, stroke:#000, stroke-width:1.25px
    style L_MOTOR       fill:#fff, stroke:#000, stroke-width:1.25px
    style R_MOTOR       fill:#fff, stroke:#000, stroke-width:1.25px
    style COMMUNICATION fill:#fff, stroke:#000, stroke-width:1.25px
    style SENSORS       fill:#fff, stroke:#000, stroke-width:1.25px

    linkStyle default stroke:#000000, color:#000000, stroke-width:1px;

    %% nodes
    subgraph MAINBOARD ["mainboard"]
        ESP("ESP32-S3"):::component_3V3
        MUX("mulplexer"):::component_5V0
        LEV("level shifter"):::component_3V3

        subgraph POWER ["power"]
            MINI360("MINI360"):::component_5V0
            KF33BD("KF33BD"):::component_3V3

            MINI360 ==>|"5V"| KF33BD
        end

        MUX    --> LEV
        LEV    --> ESP

        KF33BD ==>|"3V3"| ESP
    end

    PWR("external power source"):::component_VBT
    PWR ==>|"1S - 6S"| MINI360

    USB("USB-C connector"):::component_5V0
    USB --->|"DATA"| ESP
    USB ===>|"5V"| KF33BD

    subgraph L_MOTOR ["L motor"]
        ENC_L("encoder"):::component_3V3
        ESC_L("ESC"):::component_5V0

        ENC_L ---->|"1x PWM"| ESP
        ESP   -->  |"1x PWM"| ESC_L
    end

    LEDS("LED array"):::component_3V3
    ESP -->|"1x RTM"| LEDS

    CONN("12x extra connectors"):::component_5V0
    ESP -->|"1x RTM"| CONN

    subgraph R_MOTOR ["R motor"]
        ENC_R("encoder"):::component_3V3
        ESC_R("ESC"):::component_5V0

        ENC_R ---->|"1x PWM"| ESP
        ESP   -->  |"1x PWM"| ESC_R
    end

    subgraph COMMUNICATION ["communication"]
        RADIO("2.4 GHz radio receiver"):::component_5V0
        IR("infrared receiver"):::component_5V0

        RADIO --->|"6x PWM"| LEV
        IR    --->|"1x IO" | LEV
    end

    subgraph SENSORS ["sensors"]
        ODS("12x obstacle sensors"):::component_5V0
        QRE("4x line sensors"):::component_5V0

        ODS -->|"12x IO"| MUX
        QRE -->|"4x IO" | MUX
    end

    linkStyle 0,6 stroke:#ffaa00, color:#000000, stroke-width:4px;
    linkStyle 3   stroke:#00aa00, color:#000000, stroke-width:4px;
    linkStyle 4   stroke:#aa0000, color:#000000, stroke-width:4px;
    

Hardware Architecture

Note

Only the main connections are described, check the board pages for details.